Kegland Archives -

Nylon Reinforced Black Pluto Dispensing Gun

Robert — Thu, 16 Apr 2026 08:50:02 +0000

Reinforced Gen 3 Stainless / Nylon Composite Pluto Dispensing Gun duotight compatible

Our Pluto guns are designed for the travelling beer aficionado, bbq / picnic brewlords, or even the kombucha cider folk of the world! These pluto guns are becoming more and more common in the industry for ease of pouring, reliability and that great feel of holding a dispensing weapon.
Now with a reinforced handle section. This helps to avoid stress fractures that had become very common with extended use over time.

This model is the Black Nylon / Stainless version, it comes with a barb that can suit 4mm to 6mm beer line. Extremely tough nylon coating, we've done a lot of testing with this model. Running it over in the ute did not stop the from pouring an icy cold one!
Key Features:
- Reinforced Black Nylon Coated
- Adjustable tension spring
- 100% detachable for thorough cleaning of potential blockages.

The post Nylon Reinforced Black Pluto Dispensing Gun appeared first on .

duotight 9.5mm (3/8″) x Ball Lock Disconnect (Grey+ Red/Gas)

Robert — Thu, 16 Apr 2026 08:47:49 +0000

duotight 9.5mm (3/8″) x Ball Lock Disconnect (Grey+ Red/Gas)
The humble plastic ball lock disconnects have been around a long time and are used by thousands of home brewers around the world. Despite the extensive use they have seen little to no innovation for decades and KegLand wanted to change this. As a result we have come out with the new duotight ball lock disconnect.
Some of the features include:
duotight push in
These duotight ball lock disconnects already have the duotight fitting built into the ball lock disconnect. No need for additional threaded fittings. Simply push the beer/gas line in and you are done!
Compact
The worlds most compact ball lock disconnect every manufactured. This new compact form factor is great for tight spaces or fridges where you want to pack as many kegs in as possible. This is the only ball lock disconnect that allows standard ball lock kegs to be double stacked while still connected to beer and gas lines.
Overmoulded Poppet
The overmoulded poppet design means you can couple and disconnect this ball lock disconnect under extreme pressures of 150psi and will never have issues with the o-ring blowing out.
Tool-less Disassembly
Other ball lock disconnects require a tool such as a flat head screw driver or spanner to take them apart for cleaning. The new caps on these allow for easy disassembly by hand, making these easier to break down for cleaning. It’s literally never been easier to remove hop particles from your ball lock disconnects.
Extreme Chemical Resistance
No cheap ABS plastic or nitrile seals. This ball lock disconnect is made from stainless spring and ball bearings, with an engineering polykeytone resin body, EPDM and PP/EPDM overmoulded poppet. This makes this ball lock disconnect resistant to extreme chemicals such as phosphoric and acetic acid, caustic soda, peroxide and many other acid or base chemicals which are commonly used in homebrewing.
Toughness
This ball lock disconnect is more robust than any other plastic ball lock disconnect ever manufactured due to the use of new engineering plastics. Don’t be fooled by the small form factor – these bad boys are tough!
High Flow
The internal design of these allows for faster flow meaning you can slightly quicker transfers when compared to other plastic ball lock disconnects.

duotight Swivel Elbow Sold Separately

The post duotight 9.5mm (3/8″) x Ball Lock Disconnect (Grey+ Red/Gas) appeared first on .

duotight 9.5mm (3/8″) x Ball Lock Disconnect (Black + Yellow/Liquid)

Robert — Thu, 16 Apr 2026 08:47:30 +0000

duotight 9.5mm (3/8″) x Ball Lock Disconnect (Black-Yellow/Liquid)
The humble plastic ball lock disconnects have been around a long time and are used by thousands of home brewers around the world. Despite the extensive use they have seen little to no innovation for decades and KegLand wanted to change this. As a result we have come out with the new duotight ball lock disconnect.
Some of the features include:
duotight push in
These duotight ball lock disconnects already have the duotight fitting built into the ball lock disconnect. No need for additional threaded fittings. Simply push the beer/gas line in and you are done!
Compact
The worlds most compact ball lock disconnect every manufactured. This new compact form factor is great for tight spaces or fridges where you want to pack as many kegs in as possible. This is the only ball lock disconnect that allows standard ball lock kegs to be double stacked while still connected to beer and gas lines.
Overmoulded Poppet
The overmoulded poppet design means you can couple and disconnect this ball lock disconnect under extreme pressures of 150psi and will never have issues with the o-ring blowing out.
Tool-less Disassembly
Other ball lock disconnects require a tool such as a flat head screw driver or spanner to take them apart for cleaning. The new caps on these allow for easy disassembly by hand, making these easier to break down for cleaning. It’s literally never been easier to remove hop particles from your ball lock disconnects.
Extreme Chemical Resistance
No cheap ABS plastic or nitrile seals. This ball lock disconnect is made from stainless spring and ball bearings, with an engineering polykeytone resin body, EPDM and PP/EPDM overmoulded poppet. This makes this ball lock disconnect resistant to extreme chemicals such as phosphoric and acetic acid, caustic soda, peroxide and many other acid or base chemicals which are commonly used in homebrewing.
Toughness
This ball lock disconnect is more robust than any other plastic ball lock disconnect ever manufactured due to the use of new engineering plastics. Don’t be fooled by the small form factor – these bad boys are tough!
High Flow
The internal design of these allows for faster flow meaning you can slightly quicker transfers when compared to other plastic ball lock disconnects.

duotight Swivel Elbow Sold Separately

The post duotight 9.5mm (3/8″) x Ball Lock Disconnect (Black + Yellow/Liquid) appeared first on .

Stainless Steel Hop Tube with Chain

Robert — Thu, 16 Apr 2026 08:40:43 +0000

Stainless Steel Hop Tube with Chain
Our hop tubes are made from 304 stainless steel and is ideal for addling larger amounts of hop pellets, flowers or spices to your Brew without blocking the pump. It can also be used in your Kettle/Boiler or 19L Corny keg. It cannot fit in a standard 50L Keg as the opening is not wide enough.
The fine mesh will prevent large particles from blocking the dip tube, pumps or chillers. It will hold approximately 150g of hop pellets, allowing for some space to permit full extraction of the hop oils. Ideal for dry hopping in the keg and can also be used for fruits, wood chips, spices and more. Includes a small ring so it can be hung from the keg lid or side of the vessel.
Dimensions
Diameter is 66 mm
Height is 300 mm.
+ Adjustable Stainless Chain for keg suspension.

The post Stainless Steel Hop Tube with Chain appeared first on .

Magnetic Drive Pump | MKII Version | 25 Watt

Robert — Thu, 16 Apr 2026 08:39:41 +0000

This magnetic drive pump is the ideal pump for your brewing system needs. Capable of withstanding temperatures up to 120C it can handle the boil directly without the need to cool before use. Extremely efficient 1.1amp pump which can be run continuously at elevated temperatures.
A 1/2″ ball valve is recommended on the outlet side to reduce the flow if you’re using this for brewing purposes and don’t want it to go full ball. Putting pressure from restrictive flow will not hurt a magnetically driven pump, it is precisely what this baby is used for.
It is not self priming, so it will need to be lower than the vessel primed with liquid before it can push it around. It is not submersible!

The post Magnetic Drive Pump | MKII Version | 25 Watt appeared first on .